Shielding covers for printed circuit boards (PCBs) ensure an isolation of components on the PCBs. The cover and the frame are assembled using clips thus creating a form of protection based on the Faraday principal. The clips are placed above one or several components to provide an excellent electromagnetic shielding. We also offer a large range of standard covers or set of covers/frames. We can also customize parts to meet your specifications (material, dimensions, form and surface treatment).

Materials: Tin-plated steel, Nickel Silver, Copper, Stainless steel

Manufacturing processes: Cutting and folding using press, etching, and stamping processes.

Packaging: Thermoformed tray or rolls for pick and place.

Options: Multi-walls shielding, perforated sheets for aerations, assembly with a thermal interface, an absorber…

Prototyping: with soft tooling for the validation stage.
 

An elastomer connector allows the connection of several electronic assemblies, by pressure, between PCBS, display, component, microphone, MGA matrix component, etc. We offer design assistance for choosing the connector type, pitch, dimensions, insulation specific to each application. With this principle of elastomer connector, we can also offer design test support based on the components to be tested.

Material:  Silicone with conductive wires (gold plated beryllium bronze or carbon loaded).

Manufacturing process: Laminating of silicone and conductive materials or gold wires.

Options: Silicone hardness, lateral isolation, matrix connection, test support.
 

These spacers are metallic parts, threaded or not, used for the assembly of electronic PCBS or modules. The spacers allow to achieve a grounding contact. Several standard parts are offered in our range of spacers but we can also customize spacers based on your design and your technical constraints.

Material : Brass, Carbon steel

Electroplated : Sn, Au plated

Manufacturing process : SMT automatic process

Packaging: Rolls for SMT assembly or in bulk

Option: Kapton caps

Absorbent materials are used for electromagnetic insulation and electromagnetic emission absorption by Joule effect. Several materials are available: wide range absorption foam, absorber or elastomer base absorbers with low thickness and frequency tuned. Our range products are specifically offered for radio frequency (RFID) applications using very thin absorbers (0.1mm to 3mm).  Production parts can be available in rolls for automatization (deposit on automated lines).

Materials: Urethane, silicone, nitrile, neoprene.

Manufacturing processes: Molding, impregnated foams, on-line injection.

Options: Cutting on drawing, adhesive, complexing with other materials like insulator, aluminum strip.